x

X


 
Offshore Anchor
Coastal Anchor
Storm Drogue
Rescue Dinghy


Trip Line
Anchor Bag
Pendant Line
Anchor Rode
Hardware
Chafe Gear
Floats
Anchor Video
xx



The ONLY removable chafe guard reinforced  
with 1/4" Marine Fome
by fiorentino



"I used them through three direct
hits, Francis, Jeanne, and Wilma.
Each storm hit us with over 110
MPH sustained winds and two eyewalls.They are what every
boat needs for chafe protection!!"

Capt. Jim Harrison  





The outer shell is made from Sun Protector™ fabric, the strongest fabric available. Sun Protector™ fabric is U.V.-, salt water-, chemical-, rot- and mildew-resistant. The inside core is made from a ¼-inch closed-cell Marine Fome that doesn’t absorb water, and is rot- and mildew-resistant. This special inside core is beefed-up to reinforce the outer shell so that it can absorb shock loads from excessive rode strain, protecting your boat. Designed specifically to fit over the deployment rode that is used to feed out your para-anchor, simply wrap RodeRap™ around the deployment rode. You can also use RodeRap™ around your ground anchor rope or chain—it’s so durable that tugboat operators use RodeRap™ to protect their towlines.
The 36-inch-long chafe guard features a ¼-inch flat Velcro®  easy-to-remove closure. Easily ties off to cleats with a strong double-back stitch loop. Guaranteed not to rip. Manufactured in the U.S.A. by Fiorentino.

                                                      RodeRap™ Size Chart & Price:

  Model #    For Rode    Ship Wt.    Price Length
RRP-SM Up to 3/4" 0.5 lb. $39.99 36"
RRP-LG Up to 1 1/4" 0.8 lb. $59.99 36"

 


The ONLY removable chafe guard reinforced  
with 1/4" Marine Fome
by fiorentino

The outer shell is made from Sun Protector™ fabric, the strongest fabric available. Sun Protector™ fabric is U.V.-, salt water-, chemical-, rot- and mildew-resistant. The inside core is made from a ¼-inch closed-cell Marine Fome that doesn’t absorb water, and is rot- and mildew-resistant. This special inside core is beefed-up to reinforce the outer shell so that it can absorb shock loads from excessive rode strain, protecting your boat. Designed specifically to fit over dock or mooring lines. The 12-inch-long chafe guard features a ¼-inch flat Velcro® easy-to-remove closure. Easily ties off to cleats with a strong double-back stitch loop. Guaranteed not to rip. Sold in pairs.  Manufactured
in the U.S.A. by Fiorentino.
 
 

  Model #    For Rode    Ship Wt.    Price Length
LRP-SM Up to 1" 0.5 lb. $29.99 12"

Return to Top

D






Phone: 1(800) 777-0732 (U.S. Only) or (949) 631-2336
FAX: (949) 722-0454 - 1048 Irvine Ave. #489
Newport Beach, CA 92660
Copyright © 2000-2004-2007 by Fiorentino,
All Rights Reserved